Wheel hub oil seal
145*175*13
1. In daily car maintenance, the number of times the car oil seal and oil seal may be replaced belongs to the auto parts with a large amount of auto parts. The oil seal oil seal can also be called the oil retaining ring. Among many auto parts, many are installed with oil seals. For example, parts such as rolling bearings or sliding bearings on the car;
2. The function is: it is used to prevent the leakage or leakage of lubricating oil or other oils, etc., it can also prevent the infiltration of dust, maintain the good lubrication conditions of rolling or sliding friction parts, and prolong the service life. The general oil seal will be there in the car; 3. Engine: crankshaft -- crankshaft front, rear oil seal, valve -- valve oil seal, camshaft -- camshaft, transmission Transmission: transmission transmission -- transmission front, rear oil seal (transfer The parts of the car such as the front and rear oil seals of the transfer case) need oil seals.
When installing, if the outer surface roughness of the shaft diameter is low or there are defects such as rust spots, corrosion, burrs, etc., use a fine emery cloth or oil stone to smooth it; apply clean oil or grease on the oil seal lip or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the keyway on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate the oil seal inward and press it in. Do not smash hard to prevent the oil seal from being deformed. Or squeeze the spring and fail; if the lip is flanged, the spring falls off and the oil seal is skewed, it must be removed and re-installed. It should be noted that when the shaft diameter is not worn and the oil seal spring has sufficient elasticity, do not tighten the inner spring without authorization
product name | Rubber oil seal | ||||||
size | 145*175*13 | ||||||
Material | rubber and steel | ||||||
color | blue | ||||||
Serve | Sales / After Sales | ||||||
warranty period | 1 year | ||||||
Minimum order quantity | 50PCS | ||||||
Package | Oupin packaging or neutral packaging can also be customized packaging |
||||||
delivery time | 15-30DAYS | ||||||
Shipping terms | |||||||
payment terms | T/T D/P credit card | ||||||
OEM&ODM: | Custom-made samples are acceptable | ||||||
material | Low TEMP. |
High TEMP. |
Performance | ||||
NBR | -40 | 120 | Good resistance to alcohol,amines, petroleum oils, and gasoline over a wide range of temperature. Also good resistance to caustic salts and fair acid. Poor in strong oxidants, chlorinated hydrocarbons, ketones, and esters |
||||
HNBR | -25 | 140 | HNBR is made from NBR by hydrogenation. It has high temperature resistance, abrasion resistance and good physical properties. |
||||
ACM | -25 | 150 | It is used in diaphragm, hose for automotive application. Good resistance to heat, ozone and oil. Generally attacked by water, alcohol, glycol and aromatic hydrocarbons. The molecular structure contains ethyl acrylate (EA). Butyl acrylate (BA), and methoxy ethyl acrylate (MEA). High BA content get better low temperature resistance, and high MEA content get more oil resistance. |
||||
EPDM | -40 | 125 | Stable in polar fluids (alcohol, ketone, and glycol), and hydrochloric acid. Due to the low specific gravity, it can compound with large amount filler. |
||||
VMQ | -60 | 125 | The most widely temperature ranges for application. Good weather and ozone resistance, but poor mechanical property and chemical resistance. |
||||
FKM | -20 | 250 | Fluoroelastomers have a high degree of chemical stability and are currently the best media resistance of any elastomer. Type 26 fluoroelastomer resistant to petroleum-based oils, diester oils, silicone ether oils, silicic acid oils, inorganic acids, most organic, inorganic solvents, drugs and so on |