Drive shaft center support bearing for Toyota Cressida 37230-12050 (Cojinete de soporte central)

●    Our factory has more than 10 years of production experience

●    We only focus on automotive rubber parts, so we are more professional

●    We have gained a good reputation from our sincere customers

●    Offers a wide range of products for your car

●    We have professional sales staff and after-sales service

1. Remove the drive shaft from the car. The dismantling of the drive shaft should start from the rear end of the rear drive shaft and proceed to the front in sequence. First unscrew the 4 bolts on the universal joint fork connected with the drive axle, remove the rear end of the main drive shaft, and then unscrew the 4 bolts on the universal joint fork connected with the intermediate drive shaft, Remove the front end, so that the entire main drive shaft can be removed; loosen the connecting bolts between the intermediate support and the frame beam, remove the end with the intermediate support, and finally loosen the nut connected to the parking brake drum, put the middle support The drive shaft is completely removed.
2. Inspection before disassembly of the assembly. It should be checked whether the assembly marks on the assembly are complete and clear. If the marking is incomplete or unclear, it should be clearly marked before disassembly.