Products
-
For Volvo, DAF, Driveshaft Center Bearing OEM 1667743 93158251
European truck parts, this product is a combination of high-quality steel plate, natural rubber, and high-quality bearings. High speed, low noise. Make the product last longer.
OEM:1667743 93158251 Bearing hole 45mm
-
Drive shaft center support bearing OEM8979428760 for Isuzu
Driveshaft center support bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime. Design Features: Reliability: Bearing bushings are pre-lubricated and pre-sealed with an additional layer of grease between the bearing retainer and the sealed bearing to extend bearing life. Durability: Heavy-duty brackets made of reinforced large-diameter cold-rolled steel for high strength and durability. Rubber pads absorb and isolate vibration to help extend bearing life in harsh applications. Performance: We strictly test the transmission center support bearings to ensure product performance and quality standards. Interchangeability: Drive center support bearings are interchangeable with all major truck applications for easy installation and reliable run time.
-
For Toyota Driveshaft Center Support Bearing OEM37230-22042
Drive Center Support Bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime. Design Features: Reliability: Bearing bushings are pre-lubricated and pre-sealed with an additional layer of grease between the bearing retainer and the sealed bearing to extend bearing life.
-
Factory Direct Drive Shaft Center Bearing Bracket OEM 37230-35070
Drive Center Support Bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime. Design Features: Reliability: Bearing bushings are pre-lubricated and pre-sealed with an additional layer of grease between the bearing retainer and the sealed bearing to extend bearing life.
-
Drive shaft center support bearing OEM26121226723 for E30
Drive Center Support Bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime. Design Features: Reliability: Bearing bushings are pre-lubricated and pre-sealed with an additional layer of grease between the bearing retainer and the sealed bearing to extend bearing life.
-
Driveshaft Auto Parts HB 88509 HB 88510
Drive Center Support Bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime.
The central bearing is installed in the center of the bottom of the vehicle to support the drive shaft. It is composed of bearings, brackets, rubber pads and oil flingers. The good sealing performance of the bearings can ensure a long service life. -
Transmission shaft center support bearing OEM2202D-084-D 2202D-084A for Dongfeng EQ140
The main function of the drive shaft is to support the rotating body and transmit power. The working conditions are generally subject to alternating torque and tension and compression loads, and the journal and key parts are subject to large friction and wear. The failure modes are mainly fracture and local excessive wear, and the fracture includes fatigue fracture and overload fracture. Therefore, when selecting materials, the materials should have sufficient strength, stiffness and certain toughness, good wear resistance, high fatigue strength and good machinability. That is, the main shaft is required to have good comprehensive mechanical properties.
-
Drive shaft center support bearing OEM 81394106013 81394106017 1235569 0678426
The drive shaft is a rotating body with high speed and few supports, which is very important for the dynamic balance of the car, so the drive shaft of the car must be tested for dynamic balance before the car leaves the factory, and it is adjusted on the dynamic balancing machine. For front-engine rear-wheel drive vehicles, the transmission shaft of the car is a very important part. The transmission shaft is composed of a shaft tube, a telescopic sleeve and a universal joint, which can automatically adjust the distance between the transmission and the drive axle. The function of the universal joint is the key part on the drive shaft of the automobile, which is installed between the output shaft of the transmission and the input shaft of the drive axle final reducer. The relative position of the two shafts can be ensured, and the power is transmitted within the expected range.
-
Truck Drive Shaft Center Support Bearing 221881 1113031 1387764 For Stania Series
The drive shaft is a rotating body with high speed and few supports, which is very important for the dynamic balance of the car, so the drive shaft of the car must be tested for dynamic balance before the car leaves the factory, and it is adjusted on the dynamic balancing machine. For front-engine rear-wheel drive vehicles, the transmission shaft of the car is a very important part. The transmission shaft is composed of a shaft tube, a telescopic sleeve and a universal joint, which can automatically adjust the distance between the transmission and the drive axle. The function of the universal joint is the key part on the drive shaft of the automobile, which is installed between the output shaft of the transmission and the input shaft of the drive axle final reducer. The relative position of the two shafts can be ensured, and the power is transmitted within the expected range.
-
Drive shaft center support bearing OEM9014110312 for truck drivetrain
The main function of the automobile transmission shaft is to support the rotating body and transmit power. The working conditions are generally subject to alternating torque and tension and compression loads, and the journal and key parts are subject to large friction and wear. The failure modes are mainly fracture and local excessive wear, and the fracture includes fatigue fracture and overload fracture. Therefore, when selecting materials, the materials should have sufficient strength, stiffness and certain toughness, good wear resistance, high fatigue strength and good machinability. That is, the main shaft is required to have good comprehensive mechanical properties.
-
Truck center bearing OEM9734100012
The main function of the automobile transmission shaft is to support the rotating body and transmit power. The working conditions are generally subject to alternating torque and tension and compression loads, and the journal and key parts are subject to large friction and wear. The failure modes are mainly fracture and local excessive wear, and the fracture includes fatigue fracture and overload fracture. Therefore, when selecting materials, the materials should have sufficient strength, stiffness and certain toughness, good wear resistance, high fatigue strength and good machinability. That is, the main shaft is required to have good comprehensive mechanical properties.
-
Rubber drive bearing support assembly OEM2202D-084-D 2202D-084A
Driveshaft center support bearings are easy to install and replaceable with all major truck applications to help increase your vehicle’s uptime.
The central bearing is installed in the center of the bottom of the vehicle to support the drive shaft. It is composed of bearings, brackets, rubber pads and oil flingers. The good sealing performance of the bearings can ensure a long service life.
