Products
-
High quality wheel oil seal TA 81.7*121*12/19 ,TA 82*121*12/19 ,OEM 8-97122-937-0 ,8971229370
The skeleton oil seal is a typical representative of the oil seal. Generally speaking, the oil seal refers to the skeleton oil seal. The function of the oil seal is generally to isolate the parts that need to be lubricated in the transmission parts from the external environment, so as not to let the lubricating oil leak. The skeleton is like the steel bars in the concrete member, which acts as a reinforcement and enables the oil seal to maintain its shape and tension. According to the structure, it can be divided into single lip skeleton oil seal and double lip skeleton oil seal. The auxiliary lip of the double-lip skeleton oil seal plays a dust-proof role to prevent external dust and impurities from entering the machine. According to the skeleton type, it can be divided into inner skeleton oil seal, exposed skeleton oil seal and assembled oil seal. According to working conditions, it can be divided into rotary skeleton oil seal and reciprocating skeleton oil seal. For gasoline engine crankshafts, diesel engine crankshafts, gearboxes, differentials, shock absorbers, engines, axles and other parts.
-
Differential shaft oil seal for Mercedes Benz truck parts NBR rubber seal 85*155*12/33
Oil seals, also known as oil retaining rings, should be installed in all parts of the automobile where rolling bearings or sliding bearings are installed to prevent the leakage or leakage of lubricating oil or grease, and at the same time prevent the immersion of dust or sludge. Good lubrication conditions for rolling or sliding friction parts for extended service life
-
Truck Wheel Hub Seal OEM370065A
The wheel hub oil seal is a daily car maintenance. The number of times that the car oil seal and oil seal may be replaced belongs to the auto parts with a large amount of consumption. The oil seal oil seal can also be called the oil retaining ring. Among many auto parts, many are installed with oil seals. , such as rolling bearings or sliding bearings on the car, etc.; the function is to prevent the leakage or leakage of lubricating oil or other oils, etc., it can also prevent dust from infiltrating, and maintain good lubrication conditions for rolling or sliding friction parts ,Extended service life.
-
Wear-resistant and high-temperature resistant size 90*154*13 rubber crankshaft oil seal
The crankshaft oil seal is a mechanical component used to seal grease (oil is a common liquid substance in the transmission system, and also generally refers to a general liquid substance). Oil leakage. The seals used for static seals and dynamic seals (generally reciprocating motion) are called seals. The representative form of the oil seal is the TC oil seal, which is a double-lip oil seal with a self-tightening spring completely covered by rubber. Generally speaking, the oil seal often refers to this TC skeleton oil seal.
-
Combination Oil Seal 85*110*16 Truck Agricultural Machinery Parts Engine Parts OEM 12001909B
The outer diameter of the seal is designed to provide better static sealing, limited rebound effect, accurate positioning and a solid foundation for sealing in its housing, and better heat dissipation for low or high viscosity fluids.
Depending on the application, apply a compatible lubricant to different areas inside the seal, which will allow for better heat dissipation, lubricate the additional sealing lip during friction and prevent the ingress of external contaminants. -
truck seal rubber oil seal OEM 26298 size 55*92*9
A robust hub seal with a multi-point exclusive labyrinth built into a single housing, this seal is the ultimate seal against element ingress and oil ingress while minimizing friction. Unique design provides excellent contaminant removal with optimized surface velocity.
-
Wheel hub oil seal, half shaft oil seal 60*72*12 OEM MH034134
Gear oil is required for the gearbox work, and the half shaft needs to be transmitted to the wheels after the gearbox is shifted.
There is too much oil in the transaxle case, exceeding the standard height. The solution is to drain the excess oil to keep the oil level within the standard height.
The exhaust hole of the exhaust plug of the drive axle housing is blocked, the oil temperature and oil pressure increase during driving, and the lubricating oil is squeezed out of the oil seal.
The oil seal of the axle shaft is aged and deteriorated, and the sealing function is lost. -
Oil seal customization China oil seal factory sales with a full range of product sizes TAY 85*128*12/22
Oil resistance; heat resistance; wear resistance; aging resistance; insulation; acid and alkali resistance; airtight; shock absorption and other product advantages: Excellent durability and flexibility of use. Specially designed ropes enhance durability and length stability. Excellent heat, water and water resistance. Stable at high speeds.
-
Rubber oil seal power steering oil seal 26*34*4.5/7OEM 0770198134
Oil seals are often referred to as grease, fluid, dirt or lip seals. Oil seals are an integral part of any assembly of rotating and moving parts.They close the space between fixed and moving parts in mechanical equipment. In most applications, seals are either partially or temporarily immersed or simply exposed to splashes of lubricant, especially in engines, transmissions, gearboxes or axles. They are an essential part of almost all machines and vehicles in operation. Oil seals usually consist of three basic components: sealing element (nitrile rubber part), metal housing and spring. It is a widely used sealing element. The function of the seal is to prevent the leakage of the medium along the moving parts.
-
High quality rubber oil seal 75*95*20
Prevent sediment, dust, moisture, etc. from intruding into the bearing from the outside; limit the leakage of lubricating oil in the bearing. The requirements for the oil seal are that the dimensions (inner diameter, outer diameter and thickness) should meet the regulations; appropriate elasticity is required, which can properly clamp the shaft and play a sealing role; it must be heat-resistant, wear-resistant, strong, and resistant to media ( oil or water, etc.), long service life.
-
Factory direct sales TC type oil seal 65*90*13 rubber sealing ring
The TC oil seal isolates the part of the transmission part that needs to be lubricated from the output part, so that theLubricating oil will not leak. Static seals and dynamic seals (usually reciprocating) seals are called oil seals.
-
Crankshaft rear oil seal 130*150*14 OEM MH034087
The sealing ability of the crankshaft oil seal depends on the thickness of the oil film on the sealing surface. If the thickness is too large, the oil seal will leak; if the thickness is too small, dry friction may occur, causing oil seal and shaft wear; Wear; 3. Therefore, when installing, it is necessary to apply some oil on the sealing ring, and at the same time ensure that the skeleton oil seal is perpendicular to the axis line. If it is not perpendicular, the sealing lip of the oil seal will drain the lubricating oil from the shaft, which will also cause Excessive wear of the sealing lip. During operation, the lubricant in the casing seeps out a little, so that it is ideal to form an oil film on the sealing surface.
